滚珠丝杠支承座轴承

Combined Needle Roller And Double Direction Thrust Cylindrical Roller Bearings

ZARF

ZARF…L 系列

 

轴径 型号 重量 型号 重量 尺寸   基本额定载荷     极限转速 固定螺栓 拧紧力矩
Shaft Designation Mass Designation Mass Dimensions   Basic Load Ratings   Limiting Speed Setscrew Tightening
Diameter         D H H1 H2 H3 C D1 D2 D3 B B1 B2 r r1 d1 J 径向 Radial 轴向 Axial 规格 数量 Torque
                                            动  Cr 静  Cor 动  Cr 静  Cor oil grease spec amount  
                                            Dynamic Static Dynamic Static          
mm   g   g                           min. min.     kN kN kN kN rpm rpm     Nm
15 ZARF  1560TN 420 ZARF  1560LTN 450 15 60 40 26.0 53 39.0 14.0 35 24 34 7.5 20.5 11 0.3 0.6 3.2 46 13.0 17.5 24.9 53.0 8500 2200 M6 6 10
17 ZARF  1762TN 490 ZARF  1762LTN 520 17 62 43 27.5 57 41.5 14.0 38 28 38 9.0 23.0 11 0.3 0.6 3.2 48 14.0 19.9 26.0 57.0 7800 2100 M6 6 12
20 ZARF  2068TN 560 ZARF  2068LTN 610 20 68 46 29.0 60 43.0 14.0 42 30 40 10.0 24.0 11 0.3 0.6 3.2 53 14.1 20.6 27.4 77.0 7000 2000 M6 8 18
  ZARF  2080TN 1100 ZARF  2080LTN 1220 20 80 60 38.0 75 53.0 18.0 52 40 50 12.5 27.5 11 0.3 0.6 3.2 63 22.6 36.0 64.0 86.0 6000 1500 M6 8 38
25 ZARF  2575TN 780 ZARF  2575LTN 840 25 75 50 33.0 65 48.0 18.0 47 36 45 10.0 25.0 11 0.3 0.6 3.2 58 24.8 39.8 30.5 93.5 6000 1900 M6 8 25
  ZARF  2590TN 1600 ZARF  2590LTN 1750 25 90 60 38.0 75 53.0 18.0 62 48 60 12.5 27.5 11 0.3 0.6 3.2 73 24.8 41.4 80.0 199.0 4900 1400 M6 8 55
30 ZARF  3080TN 850 ZARF  3080LTN 900 30 80 50 33.0 65 48.0 18.0 52 40 50 10.0 25.0 11 0.3 0.6 3.2 63 24.3 41.0 33.9 110.0 5500 1800 M6 12 32
  ZARF 30105TN 1950 ZARF 30105LTN 2150 30 105 66 41.0 82 57.0 18.0 68 52 66 14.0 30.0 12 0.3 0.6 3.2 85 25.9 45.8 75.7 221.0 4400 1300 M6 12 75
35 ZARF  3590TN 1120 ZARF  3590LTN 1250 35 90 54 35.0 70 51.0 18.0 60 45 58 11.0 27.0 12 0.3 0.6 3.2 73 26.0 47.0 45.9 105.4 4800 1700 M6 12 42
  ZARF 35110TN 1600 ZARF 35110LTN 1850 35 110 66 41.0 82 57.0 18.0 73 60 73 14.0 30.0 12 0.3 0.6 3.2 88 28.0 52.7 78.2 237.6 4000 1250 M6 12 100
40 ZARF 40100TN 1350 ZARF 40100LTN 1450 40 100 54 35.0 70 51.0 18.0 65 50 63 11.0 27.0 12 0.3 0.6 3.2 80 30.4 58.6 51.7 180.1 4400 1600 M8 8 55
  ZARF 40115TN 2700 ZARF 40115LTN 3000 40 115 75 47.5 93 65.5 22.5 78 60 78 16.0 34.0 12 0.3 0.6 6.0 94 40.9 72.5 84.2 269.2 3700 1200 M8 8 120
45 ZARF 45105TN 1700 ZARF 45105LTN 1850 45 105 60 40.0 75 55.0 22.5 70 56 68 11.5 26.5 12 0.3 0.6 6.0 85 38.0 74.0 61.0 177.0 4000 1500 M8 8 65
  ZARF 45130TN 3900 ZARF 45130LTN 4300 45 130 82 51.0 103 72.0 22.5 90 70 88 17.5 38.5 14 0.3 0.6 6.0 105 42.5 78.8 115.9 363.0 3300 1150 M8 8 150
50 ZARF 50115TN 2100 ZARF 50115LTN 2450 50 115 60 40.0 78 58.0 22.5 78 60 78 11.5 29.5 12 0.3 0.6 6.0 94 42.6 78.8 44.2 158.4 3600 1200 M8 12 85
  ZARF 50140TN 4200 ZARF 50140LTN 4650 50 140 82 51.0 103 72.0 22.5 95 75 93 17.5 38.5 14 0.3 0.6 6.0 113 45.5 88.1 119.3 387.2 3100 1100 M8 12 180
55 ZARF 55145TN 4500 ZARF 55145LTN 5000 55 145 82 51.0 103 72.0 22.5 100 80 98 17.5 38.5 14 0.3 0.6 6.0 118 49.0 109.9 126.0 369.0 2900 1000 M8 12 220
60 ZARF 60150TN 4700 ZARF 60150LTN 5350 60 150 82 51.0 103 72.0 22.5 105 90 105 17.5 38.5 16 0.3 0.6 6.0 123 54.9 118.6 141.0 505.0 2700 950 M8 12 250
65 ZARF 65155TN 5120 ZARF 65155LTN 5720 65 155 82 51.0 103 72.0 22.5 110 90 108 17.5 38.5 16 0.3 0.6 6.0 128 54.2 100.8 126.2 441.4 2600 900 M10 12 270
70 ZARF 70160TN 5200 ZARF 70160LTN 6000 70 160 82 51.0 103 72.0 22.5 115 100 115 17.5 38.5 16 0.3 0.6 6.0 133 69.6 143.5 143.0 532.0 2400 800 M10 12 330
75 ZARF 75185TN 9400 ZARF 75185LTN 10610 75 185 100 62.0 125 87.0 27.0 135 115 135 21.0 46.0 16 0.3 1.0 6.0 155 95.0 193.0 233.0 769.0 2100 700 M12 12 580
90 ZARF 90210TN 13700 ZARF 90210LTN 15100 90 210 110 69.5 135 97.5 32.0 160 130 158 22.5 47.5 16 0.3 1.0 8.0 180 101.0 2256.0 320.0 1172.0 1800 700 M12 16 960
说明:                                
1.表中所列基本额定载荷、极限转速和重量,仅供选择参考用。                  
2.轴承的保持架如由塑料制成,在型号后加TN,允许工作温度:120℃连续,180℃短期。          
                                 
Note:                                
1.These load, speed and mass is reference of choice only.                
2.If the cages are made of plastics, suffix “TN” is added to the bearing No., the maximum 
  allowable working themperrature is 120℃ in continuous working and 180℃ in short working.


    备注:如果需要其他技术参数,请通过email:fyb-z@fyb-bearing.cn或电话:0511-85626192与腾讯分分彩一期一计划轴承研究所联系